Plastic

Scanaway for manual cleaning of Amiad 2"/3" filters. The scanaway assembly consists of a hollow PVC pipe with suction nozzles that face the inner side of the screen. A handle, connected to the suction scanner from the outside, turns the scanner so that it rotates without touching the screen surface. Opening an exhaust valve creates a low pressure condition, which causes the scanner nozzles to suck in the dirt from the screen's surface. Scanning can be done during the filter process without interrupting the water flow.

Available as a retro-fit assembly kit for use with existing Amiad filters 2"T and 3"T

For manual cleaning of Amiad 2"-14" filters. This device provides a quick and efficient cleaning of manual filters.The Brushaway assembly consists of nylon brushes that are fitted on a stainless steel frame and inserted into the filter screen. A simple handle, outside the filter, enables brushing away particles from the screen's surface. Brushing is done during the filtering process without stopping the water flow. Regular brush cleaning requires minimal system shut down or handling of internal parts. There is no additional head loss through the filter when installed. Recommended for filtration degrees of 200 micron and coarser.

Available as a retro-fit assembly kit for use with existing Amiad filters.

A solution for non-stop filtration. Particles are pushed to the debris area, and the filter screen remains clean at all times. The Turboclean consists of a screen cylinder with an inside Torpedo device, preventing particles from remaining on the screen. Periodical opening of the drain port releases the dirt from the debris area without opening the filter for cleaning.

automatic flushing of Turboclean filters

The Autoflush is supplied with a hydraulic valve that opens automatically by means of an electronic timer. The timer allows the determination of the flushing duration intervals. This is applicable to 3" LT-S filters or for 2 or more filter units operated in sequence.

Steel

For Semi-Automatic cleaning of 4"-14" filters

Made of nylon brushes on a stainless steel frame, which is threaded into the filter lid and inserted inside the stainless steel screen. A simple handle allows it to brush away the filtered particles lying on the screen. Cleaning is performed without stopping the water supply.

The new motorized brushaway units are available as complete filters or as assembly kits, and are suitable for all existing brushaway filters from 4"-Super up to 14".

For use with filtration degrees from 200 to 3500 micron, available with 3 phase, single phase or DC voltages. Flushing can be set according to time, with pressure differential option.

You can now convert semi-automatic brushaway to automatic filters.

2", 3" and 4" Compact steel filters are now available with Suction scanner or Brushaway features for semi-automatic operation. The scanner brush unit can be supplied with the filters , and is also available as a kit for installation on existing amiad filters. The Scanaway and the Brushaway units are for use with Amiad stainless steel screens.

Fertigation

• Fertilizers and chemical injectors
• Your key to higher yields and healthier crops.
• The most effective method for adding chemicals and fertilizers to crops via the existing irrigation system.
• No need for external power supply
• Simple operation, adjustments and maintenance
• Liquid chemical is applied directly with the water system
• Liquid chemical is applied only when needed and in the proper quantities Most effective and least expensive way of providing nutrients to growing field crops.